Table of Contents
Advertisement
2
Knowing the Parts
Left Side
Refer to the diagram below to identify the components on this side of the Notebook PC.
1
LAN Port
1
The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and
supports a standard Ethernet cable for connection to a local network. The built-in
connector allows convenient use without additional adapters.
TV-Out Port
2
The TV-Out port is an S-Video connector that allows routing the Notebook
PC's display to a television or video projection device. You can choose between
simultaneously or single display. Use an S-Video cable (not provided) for high
quality displays or use the provided RCA to S-Video adapter for standard video
devices. This port supports both NTSC and PAL formats.
Display (Monitor) Output
3
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a
monitor or projector to allow viewing on a larger external display.
USB Port (2.0/1.1)
4
2.0
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as
keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a
series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices
to run simultaneously on a single computer, with some peripherals acting as additional plug-in
sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected
or disconnected without restarting the computer.
Digital Display Output
5
-DVI
m
The Digital Video Interface port is designed to maximize video graphics output
to flat panel LCD monitors or other DVI-compliant device.
(Use the provided adapter to convert the
16
μ
-DVI
2
3
4
5
-DVI port to a standard DVI connector.)
m
6
7 8
Advertisement
Table of Contents
