When "Result : Usb Mount Ng" Is Displayed On The Control Panel; When The Tool Cannot Be Used - Toshiba e-STUDIO2010AC User Manual

(3) When "RESULT : USB MOUNT NG" is displayed on the Control Panel

If the following screen is displayed, confirm the following.
Check if the USB memory mounting position is as shown in the figure below.
Check if the connector mounting position (indicated by the red box) is as shown in
the figure below.
Check if the file systems in the USB memory is formatted in FAT32. If the file system in
the USB memory isn't formatted in FAT32, format the USB memory in FAT32.

(4) When the tool cannot be used

If the tool cannot be used even after performing the above, refer to the service manual.
20