Toshiba 28ZH46 Series Owner's Manual page 9

As an alternative to Auto Tuning, the television can be tuned-in manually using Manual Tuning. For
example: if the television cannot be connected to a VCR/decoder with a SCART lead or to tune-in a station on
another System (see page 8).
Use S and R to move across the screen and select any of these Manual Tune options.
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 8.
Search: Search up and down for a signal.
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 10.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 19.
Station Name: Station identification. Use the P or Q and S or R buttons to enter up to eight characters.
To allocate a programme position on the television for a decoder and VCR: turn the decoder on, insert a
Press MENU and using S or R select the Set up
1
menu, with Q highlight Manual Tuning, press R
to select.
Set up
Language
Country
Auto Tuning
Manual Tuning
Programme Sorting
Teletext Mode
EXIT To Exit fe
Use P or Q to highlight the programme position
2
required e.g. we suggest Prog. 0 for a VCR.
Manual tune
System Search
pre-recorded tape in the VCR and press PLAY, then manually tune.
z English x
z GB x
x
x
x
z List x
Select z x Adjust
Programme skip/
Manual fine
Channel
tuning
f Prog.
0
1
2
3
4
5
e
EXIT Watch TV
MENU Previous
OK Change
Press OK to select.
3
Press R to select System and use P or Q to
4
change (if required, see page 8).
System
f
z 0 I
e
EXIT Watch TV
MENU Previous
OK Store
9
Station Name
Manual Tuning
Channel Station
60 VCR
22 BBC1
28 BBC2
25 ITV
32 CH4
* 69
fe
z x
Manual Tuning
60 0 VCR
Continues on the next page
Select
Change
x
z x Select
fe Adjust