Pioneer GM-ME300X4C Owner's Manual page 4

Marine 4-channel amplifier
Table of Contents

Advertisement

Do not attempt to disassemble or modify
this unit. Doing so may result in fire, electric
shock or other malfunction. Damage or
defects resulting from alterations or modifica-
tions not authorized in writing by Pioneer are
excluded from limited warranty coverage.
Do not install the amplifier in a location
exposed to direct sunlight or excessive heat,
humidity or dust.
While this amplifier is designed to be water-re-
sistant, it should never be submerged under
water or subjected to high-pressure water
spray.
Install the amplifier in a dry and well-ventilated
environment, where other equipment will not
interfere with it.
When drilling holes in the chassis for instal-
lation, take precautions so as not to contact,
damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precau-
tions may result in fire.
To ensure proper heat dissipation of the
amplifier, ensure the following during
installation:
— Allow adequate space above the amplifier
for proper ventilation.
— Do not mount the amplifier in the engine
compartment or in any areas of extreme
heat.
— Do not cover the amplifier.
Ask your dealer or installation profes-
sional to install/uninstall this prod-
dangerous hazards or interfere with
Keep small items such as bolts, screws and
tools out of the reach of children. Swallowing
can cause serious injury. If swallowed, con-
sult a doctor immediately.
CAUTION
Always keep the volume low enough to hear
outside sounds.
Extended use of the amplifier while the
engine is at rest or idling may exhaust the
battery.
The graphical symbol
product means this is an electronic product
requiring direct current electrical power.
About the protection function
This product has a protection function. If this
product detects something abnormal, the Power/
Protect indicator will turn red and the operation
of amplifier will be stopped.
Possible causes include:
— When the temperature inside the product
becomes high
— When speaker output detects an abnormality
— When the supply voltage is out of
specification
The serial number is located on the bottom of
this unit. Be sure to record this number on the
enclosed warranty card before installation.
placed on the
En(3/10)
Important (Serial number)

Advertisement

Table of Contents
loading

Table of Contents