2.2
Account Code Charge Fee Reference
Provides you with the display of each account code charge (telephone rate). You can
print out and clear the displayed meter and charge.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
8
2
ID Code
3
3
4
location number
5
SEL
S 1
S 2
6
HOLD
7
HOLD
8
HOLD
— To exit from Station Programming mode: Press [PROGRAM] or lift the handset.
2-10
Station Programming
Station Programming
1. Dial 8.
2. Enter the ID Code (4 digits).
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 3.
4. Dial the location number (01 through 40) or press the NEXT
(S3) button until the location number will be designated.
• The display shows the meter.
<Example> If you assign the location number 01;
AC01:00005
SEL
5. Press the SEL (S1) button.
• The display shows the charge in Pounds.
<Example>
AC01:£00001.15
SEL
• Pressing each button corresponds to the following operations:
— CLR (S2) button : To clear the meter and charge of the
— STORE button : To print out the total meter and charge
S 3
— NEXT (S3) button : To advance to the next location
— REDIAL (PREV) button : To return to the previous
6. Press the HOLD (END) button.
• The display returns to step 4.
7. Press the HOLD (END) button.
• The display returns to step 3.
8. Press the HOLD (END) button again.
• The display shows the initial programming mode.
CLR
NEXT
CLR
NEXT
displayed location number.
of the displayed location number.
number.
location number.