GE Profile PGCS1NFZSS Owner's Manual And Installation Instructions page 31

WHAT YOU WILL NEED
NOTE: The only GE approved plastic tubing is
that supplied in GE SmartConnect
Tubing kits. Do not use any other plastic water
supply line because the line is under pressure at
all times. Certain types of plastic will crack or
rupture with age and cause water damage to
your home.
A GE water supply kit
A cold water supply.
Power drill.
1/2 or adjustable wrench.
Straight and Phillips blade screwdriver.
Two 1/4 outer diameter compression nuts and
2 ferrules (sleeves)—
OR
Shutoff valve
COLD WATER LINE
Installation Instructions
(cont.)
™ Refrigerator
adapter
OR
tube cutter
SHUT OFF THE MAIN WATER SUPPLY
1
CHOOSE THE VALVE LOCATION
2
DRILL THE HOLE FOR THE VALVE
3
Take care not to allow water to drain into
the drill.
31