Sony LMD-150MD Instructions For Use Manual page 19

Important safeguards/notices for use in the
medical environments
1. All the equipments connected to this unit shall be
certified according to Standard IEC601-1, IEC950,
IEC65 or other IEC/ISO Standards applicable to the
equipments.
2. When this unit is used together with other equipment in
the patient area*, the equipment shall be either powered
by an isolation transformer or connected via an
additional protective earth terminal to system ground
unless it is certified according to Standard IEC601-1 and
IEC601-1-1.
* Patient Area
3. The leakage current could increase when connected to
other equipment.
4. The operator should take precautions to avoid touching
the rear panel input and output circuitry and the patient
at the same time.
5. Model LMD-150MD is a monitor intended for use in a
medical environment to display pictures from cameras or
other systems. These models are nonpatient care
equipment with respect to the requirement of leakage
current.
Warning on power connection
Use a proper power cord for your local power supply.
Plug type
Female end
Cord type
Minimum cord set rating
Safety approval
* Note: Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked
"Hospital Only" or "Hospital Grade."
United State
HOSPITAL GRADE*
Min. Type SJT
Min. 18 AWG
10A/125V 10A/125V
UL CSA
Symbols on the unit
Symbol Location
Bottom
Bottom
Rear panel
Rear panel
Rear panel
Rear panel
Rear panel
IPX1
Canada Continental Europe
LP-34A or LP-34
LS-60
H05VV-F
10A/250V
VDE
This symbol indicates
Main power switch.
Press to turn the monitor
on.
Main power switch.
Press to turn the monitor
off.
The equipotential terminal
which brings the various
parts of a system to the
same potential.
Functional earth terminal
Alternating current
Attention, consult
ACCOMPANYING
DOCUMENTS
Protected against dripping
water.
Japan
VM1050
VM1010
PVCTF
12A/125V
DENANHO
3
(GB)
GB