Connect To A Computer; Connect Via Usb - BenQ S30 User Manual

Connect to a computer

▶ Passthrough Function
Use VGA Cable to connect VGA IN connector on the document
camera to the VGA OUT connector on the computer
To display computer image, press PC mode source key (
For laptop to output display mode, use the keyboard command ( Fn +
between the display modes. For different command, please refer to your laptop manual.
The signal is only pass through from VAG IN port to VGA OUT port on document camera.
Please connect an output device to display the image on computer.

▶ Connect via USB

Press MENU (
Choose "Disk" to connect mass storage.
Choose "PC Cam" to use as a PC-Cam.
RGB
→ USB connection.
) button
) on the control panel.
13
) to swtich