Setting Up Wireless Printing From A Smartphone Or Tablet - Epson ET-4850 User Manual

10. Do one of the following
• If setup was successful, select Close to exit.
• If setup was unsuccessful, select Print Check Report to print a network setup report or select Re-
enter to re-enter your network name and password.
11. Press the
The
product is not connected to the network, you may have selected the wrong network name (SSID) or
entered the password incorrectly. Repeat these steps to try again.
If you are printing from a computer, make sure you installed the network software as described on
the Start Here sheet.
Parent topic:
Related references
Status Icon Information
Related tasks
Printing a Network Status Sheet
Entering Characters on the LCD Screen

Setting Up Wireless Printing from a Smartphone or Tablet

You can use the Epson Smart Panel app to connect your Epson product to a wireless network or
connect your device directly to the product. Epson Smart Panel is available on iOS and Android devices.
Make sure you have the following:
• A Bluetooth-enabled device that is connected to a wireless network
• The Epson Smart Panel app installed on the device
• The wireless network name (SSID) and password
Note: Your device must be close enough to the product to create and maintain a Bluetooth connection.
1. Make sure the product is turned on and is ready to print.
Note: You must perform initial setup and ink installation before setting up wireless printing.
2. Open the Epson Smart Panel app on your device.
home button to exit.
Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the
Wi-Fi Infrastructure Mode Setup
41