ProForm PRO 2500 PFTL14011.0 User Manual page 9

4. Hold the Left Upright (90) against the Base
(105). Be careful not to pinch the wires. If
necessary, position the Base Ground Wire
(100) in the hole in the side of the Left Upright.
Insert two 3/8" x 2 3/4" Screws (8) and two 3/8"
x 1 1/4" Screws (9) with two 3/8" Star Washers
(14) into the Left Upright.
Partially tighten the 3/8" x 2 3/4" Screws (8) and
the 3/8" x 1 1/4" Screws (9) until the heads of
the Screws touch the Left Upright (90); do not
fully tighten the Screws yet. Note: It may be
helpful to use the Short Hex Key (43) on the
Screw shown.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
5. Identify the Left and Right Base Covers (96, 97).
Slide the Left Base Cover (96) onto the Left
Upright (90). Slide the Right Base Cover (97)
onto the Right Upright (99). Do not press the
Base Covers into place yet.
All manuals and user guides at all-guides.com
9
4
90
8
Hole
14
100
9
14
5
90
96
43
105
99
97