ProForm PRO 2500 PFTL14011.0 User Manual page 13

14. Attach a Tray Bracket (91) to the side of the
Right Upright (99) with two #8 x 3/4" Screws (2).
Make sure to use the two holes shown. Start
both Screws, and then tighten them.
Attach the other Tray Bracket (not shown) to
the Left Upright (not shown) in the same way.
Attach the Tray (87) to the Tray Brackets (91)
with four #8 x 3/4" Screws (2) (only one side is
shown). Start all four Screws, and then
tighten them.
15. Tighten the four 3/8" x 2 3/4" Screws (8), and
then tighten the four 3/8" x 1 1/4" Screws (9)
(only one side is shown).
Press the Left and Right Base Covers (96, 97)
onto the Base (105) until they snap into place.
16. Raise the Frame (64) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (65) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (65) to
the Base (105) with a 3/8" x 2" Bolt (5) and a
3/8" Nut (13).
All manuals and user guides at all-guides.com
13
14
87
99
15
96
8
9
105
16
105
13
Latch
Knob
Large
Barrel
91
2
97
64
5
65