Registering In The Relay Server List; Adding A Relay Server To The List - Canon WEBVIEW LIVESCOPE 3.2 User Manual

Registering in the Relay Server List

Adding a relay server to the list

1
2
I Relay Name
I Host Name
I Port No.
I Set the camera using the relay server
48
Procedure
Any name can be given to the relay server being registered.
Specify the IP address of the relay server.
Specify the Port numbers of each camera server. The port numbers are the values
that were set on the camera server.
If the relay server is to be used in connections established by selecting a camera
site, you can specify the camera site that can be connected via a registered relay
server.
Choose Relay Server List from the View
menu. When the relay server list appears,
click Add.
Enter each item and click OK. The relay
server is added to the list.