Table of Contents
Advertisement
Starting Camera Control
Although multiple clients can simultaneously connect to the camera server, multiple clients
cannot simultaneously control the camera. Consequently, "control privileges" has been
introduced by which only the client who currently holds the control privileges can control the
camera. Backlight adjustment and presets can also only be used when you have control
privileges.
Procedure
Click the [Start control] button to acquire control privileges.
I Camera Control Status Displays
The display changes depending on the camera control status.
1
2
display does not appear if the
camera server responds
immediately.
3
until control privileges are granted.
However, you may be granted
control privileges before this
number reaches "0" because other
users may cancel camera control or
withdraw from the queue.
Camera is not controlled.
You have clicked the
[Start control] button and
the camera server is
being contacted. This
Awaiting control privilege
reservation. The number
beside the person icon
shows the estimated time
Camera control status window
Shows the camera control status.
You have been granted
4
control privileges. The
number beside the clock
icon is your period of
exclusive control.
You can retain control
5
privileges even though
your period of exclusive
control has expired. This
is because there are no camera
control requests from other clients.
For some reason, you
6
have been disconnected
from the camera control
server, you could not
connect to the camera control
server at startup, or your connection
was not permitted. The status
display panel turns red.
Using "LiveApplet"
1
15
Advertisement
Table of Contents
