Asus ROG STRIX X570-E GAMING WIFI II Manual page 42

B. (optional) Install the bundled M.2 rubber pad if you are installing a
single sided M.2 storage device. DO NOT install the bundled M.2
rubber pads when installing a double-sided M.2 storage device. The
rubber pad installed by default is compatible with double sided M.2
storage devices.
C. Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
D. Install your M.2 to the M.2 slot.
E. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
For 2242, 2260 length
A. (optional) Remove the M.2 rubber pad.
Follow this step only if you wish to install an M.2 to type 2242.
B. (optional) If required, remove the pre-installed removable M.2 Q-Latch
screw at the 2280 length screw hole.
C. Install the M.2 Q-Latch to the M.2 length screw hole you wish to install
your M.2 to.
D. Rotate and adjust the M.2 Q-latch so that the handle points away
from the M.2 slot.
E. Install your M.2 to the M.2 slot.
F. Rotate the M.2 Q-Latch clockwise to secure the M.2 in place.
ROG STRIX X570-E GAMING WIFI II
OPTIONAL
2-7