Advertisement
•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC
power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
•WARNING: The unit must only be connected to a safety agency certified, regulated,
power source (adapter), approved for use and compliant with applicable local and
national regulatory safety requirements.
•Unplug AC power adapter before cleaning unit exterior. Use only a damp cloth
for cleaning; wait until unit is completely dry before reconnecting to power.
•Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable
of producing very high sound pressure levels, which may cause temporary or permanent
hearing damage. Use care when setting and adjusting volume levels during use.
IMPEDANCES
POWER SUPPLY
POWER REQUIREMENTS
DIMENSIONS
WEIGHT
Product specifications subject to change without notice
A PRODUCT OF
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA, U.S.A.
Fender
is a registered trademark of FMIC.
®
Copyright © 2020 FMIC. All rights reserved.
PN 7720603000 REV. A
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL LANGUAGES
Manual available in additional languages at
www.fender.com/support
SPECIFICATIONS
Input: 820K
9VDC regulated adapter,
5.5 x 2.1 mm barrel connector, center negative
165mA @ 9VDC
6.69" x 4.84" x 1.77" (170mm x 123mm x 45mm)
2.25 lbs. (1.02kg)
Output: 470
Advertisement
