Advertisement
Bypass Footswitch/LED
Engages or bypasses effect. LED illuminates when effect is on.
Distortion A and B Footswitches/LEDs
These footswitches work in conjunction with the MODE switch. When
MODE is set to Series or Bypass, footswitch will bypass each distortion
effect. LED illuminates when distortion is on. When MODEis set to Mute,
footswitch mutes output of distortion circuit.
High/Low EQ
These controls adjust overall pedal equalization and are active in all
modes, except when pedal is bypassed.
Mode Switch
Selects among Series, Parallel and Mute modes.
Level (Distortion B)
Adjusts output level of Distortion B circuit.
Tone (Distortion B)
Adjusts brightness of Distortion B circuit.
Gain (Distortion B)
Adjusts sustain or drive for Distortion B circuit.
Blend
This control works in the Parallel and Mute modes and adjusts balance
between the two distortion circuits. Control is disabled in Series mode.
Advertisement
