GE JAP02SNSS Owner's Manual And Installation Instructions page 14

Using the clock and timer.
Not all features are on all models.
OR
14
(on some models)
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the TIMER pad, then touch the + or – pads
until the time you want appears in the
display.
To Cancel the Timer
Touch the TIMER pad twice.
End of Cycle Tones
(on some models)
Clear the tones by pressing the pad of the
function you are using.
Power Outage
If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the TIMER pad and then touching
the + or – pads to enter the new time you
want.
To reset the clock, touch the CLOCK pad
twice. Enter the correct time of day by
touching the + or – pads. Touch the
START/ON pad.