Page 1
All manuals and user guides at all-guides.com REVISION HISTORY CHASSIS MODEL 9-872-856-02 PART NO. : KLV-B15G10 KLV-B20G10 SUFFIX DATE SUPP / CORR DESCRIPTION 2005/9 1st Issue 2005/12 SUPP-1 Screw change, screw indication deletion, Part change (Pg.91)
Page 2
All manuals and user guides at all-guides.com SERVICE MANUAL CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KLV-B15G10 RM-Y1108 SCC-V51A-A KLV-B20G10 RM-Y1108 SCC-V51B-A KLV-B15G10 KLV-B20G10 RM-Y1108 LCD COLOR TV...
2. Check the interboard wiring to ensure that no wires are “pinched” OPERATION. REPLACE THESE COMPONENTS WITH or contact high-wattage resistors. SONY PARTS WHOSE PART NUMBERS APPEAR AS 3. Check that all control knobs, shields, covers, ground straps, and SHOWN IN THIS MANUAL OR IN SUPPLEMENTS mounting hardware have been replaced.
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 SECTION 1 DISASSEMBLY (KLV-B15G10) 1-1. STAND ASSY REMOVAL 1-2. CABINET REAR REMOVAL 1 One screw 2 Four screws 1 Nine screws (+BVTP 4x12) (+PSW 4x12) (+BVTP 4x12) 3 Stand assy (15)
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 DISASSEMBLY (KLV-B20G10) 1-1. STAND ASSY REMOVAL 1-2. CABINET REAR REMOVAL 1 Nine screws 1 One screw (+BVTP 4x12) 2 Four screws (+BVTP 4x12) (screw +PSW 4x16) 3 Stand assy (20) 2 Cabinet Rear (20) 1-3.
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 SECTION 2 ADJUSTMENTS 2-1. AGING 2-3. ENTERING TEST/TT MODE (1) Aging must be performed before White Balance (1) With the unit on standby, press the following Adjustment. sequence of buttons on the remote commander.
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 2-5. PAL WHITE BALANCE ADJUSTMENT 2-7. SECAM WHITE BALANCE ADJUSTMENT (CUTOFF) (CUTOFF) (1) Select AV1. (1) Select AV1. (2) Set Picture Mode to “PERSONAL” and adjust to (2) Set Picture Mode to “PERSONAL” and adjust to...
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 KLV-B15G10/B20G10 RM-Y1108 RM-Y1108 SECTION 3 DIAGRAMS 3-1. BLOCK DIAGRAM (1) A (1/2) and H2 Boards Q3904 Q1201 IC1200 BUFFER SYNC TU1101 SEPARATOR TUNER VIDEO VIDEO OUT IC2000 AUDIO PROCESSOR AUDIO L/R AM/FM OUT...
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 KLV-B15G10/B20G10 RM-Y1108 RM-Y1108 (3) B and H4 Boards IC0102 IC0101 MICRO CONTROLLER COMPARATOR TV TEXT PROCESSOR CN1004 P3.4 P3.1 STBY3.3V P3.7 STBY3.3V IC3900 CN3000 IC0100 IC1003 STBY5V CPU&PWRON P3.3 EEPROM DIGITAL TEMPERATURE SENSOR...
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 KLV-B15G10/B20G10 RM-Y1108 RM-Y1108 3-2. CIRCUIT BOARDS LOCATION 3-3. SCHEMATIC DIAGRAM INFORMATION Device Printed symbol Terminal name Circuit Note: Collector All capacitors are in µF unless otherwise noted. (pF: µµF) • Transistor Capacitors without voltage indication are all 50 V.
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 KLV-B15G10/B20G10 RM-Y1108 RM-Y1108 3-3-10. B Board — (Block 006) D6304 MMDL914T1 IC6302 PQ1CZ41H2ZPH 2.5V REG (link to voltage table- 15") (Block 006) (link to voltage table- 20") C6311 L6302 R6312 L6301 1000...
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 3-4. VOLTAGE MEASUREMENT AND WAVEFORM A BOARD VOLTAGE LIST AND WAVEFORM (KLV-B15G10) Pin No Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC0001 (0.7)[1.1] (3.7)[3.4] 1.100Vp-p NTSC 1.040Vp-p IC0030 (0.6)[0.2] 1.100Vp-p NTSC (0.7)[0.5]...
Page 34
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 A BOARD VOLTAGE LIST AND WAVEFORM (KLV-B15G10) Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] 16.3 IC6206 16.3 14.4 592.0mVp-p IC6208 2.320Vp-p NTSC 32.1 NTSC 32.0 24.1 Q0002 608.0mVp-p 2.200Vp-p...
Page 35
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 A BOARD VOLTAGE LIST (KLV-B15G10) Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] Q3808 CN0043 Q3809 Q3904 560.0mVp-p 1.220Vp-p NTSC NTSC 1.100Vp-p 568.0mVp-p 1.040Vp-p NTSC 1.040Vp-p 1.100Vp-p 608.0mVp-p Q6200 NTSC...
Page 36
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 B BOARD VOLTAGE LIST (KLV-B15G10) Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC0100 (1.1)[1.4] (1.3)[1.1] IC6301 IC6302 16.2 (2.1)[1.9] IC0102 IC6305 16.2 Q6303 Q6310 Q6311 16.2 16.2 16.2 16.2...
Page 37
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 A BOARD VOLTAGE LIST AND WAVEFORM (KLV-B20G10) Pin No Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] IC0001 (4.2)[3.6] IC2000 (3.9)[4.2] (4.2)[3.9] IC2400 IC2500 IC0030 (0.4)[0.2] (4.0)[3.7] (3.9)[4.3] 14.2 IC3801 1.120Vp-p NTSC IC1200 1.100Vp-p...
Page 38
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 A BOARD VOLTAGE LIST AND WAVEFORM (KLV-B20G10) Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] Q1201 Q2000 Q2001 Q2002 4.720Vp-p NTSC Q2201 16.1 16.1 Q3807 4.560Vp-p Q3808 384.0mVp-p Q3809 NTSC Q3904 312.0mVp-p...
Page 39
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 A BOARD VOLTAGE LIST (KLV-B20G10) Pin No. Voltage[v] Pin No. Voltage[v] Pin No. Voltage[v] CN0043 584.0mVp-p 1.120Vp-p 608.0mVp-p NTSC NTSC NTSC 600.0mVp-p 1.080Vp-p 592.0mVp-p B BOARD VOLTAGE LIST (KLV-B20G10) Pin No.
Page 40
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 D BOARD VOLTAGE LIST (KLV-B20G10) Pin No. Voltage[v] Pin No. Voltage[v] Ref Pin No. Voltage[v] IC8100 Q8301 Q8000 12.3 Q8001 Q8303 Q8003 Q8400 16.0 Q8100 15.9 16.0 15.9 16.0 15.9 14.8 14.7...
Page 41
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 D BOARD VOLTAGE LIST (KLV-B20G10) Pin No. Voltage[v] Q8601 Q8602 – 59 –...
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 SECTION 4 EXPLODED VIEWS (KLV-B15G10) NOTE: • • Items marked " ∗ " are not stocked since Items with no part number and no The components identified by description are not stocked because...
REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK * A-1143-697-A COMPLETE PWB, A (KLV-B15G10) C729 1-127-738-91 CERAMIC CHIP 4.7UF * A-1143-653-A COMPLETE PWB, A (KLV-B20G10) C729 (KLV-B15G10) ***************** C730...
Page 55
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C2027...
Page 58
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R716...
Page 59
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R2013...
Page 61
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C5004...
Page 62
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK C6314...
Page 63
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R0114...
Page 64
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R5023...
Page 65
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK <CRYSTAL>...
Page 66
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK * CN8200 1-817-720-21 PIN, CONNECTOR(PC BOARD) 2P <IC LINK>...
Page 67
KLV-B15G10/B20G10 All manuals and user guides at all-guides.com RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R8032...
Page 68
All manuals and user guides at all-guides.com KLV-B15G10/B20G10 RM-Y1108 The components identified by shading and mark ! are critical for safety. Replace only with part number specified. REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK R8622...
Page 70
All manuals and user guides at all-guides.com SUPPLEMENT-1 CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. KLV-B15G10 RM-Y1108 SCC-V51A-A KLV-B20G10 RM-Y1108 SCC-V51B-A SUBJECT : SCREW QUANTITY AND SCREW TYPE CHANGE SECTION 1 DISASSEMBLY (KLV-B15G10) (refer page 4, 5) 1-9.
Page 71
All manuals and user guides at all-guides.com SUBJECT : PART CHANGE SECTION 4 EXPLODED VIEWS (KLV-B15G10) (refer page 70) 4-2. CHASSIS (1) REF. NO. PART NO. DESCRIPTION REMARK X-2103-392-1 HOLDER ASSY, SIDE JACK (15) SUBJECT : SCREW INDICATION DELETION FROM DIAGRAM...
Page 72
All manuals and user guides at all-guides.com SUBJECT : PART CHANGE (KLV-B15G10) (refer page 71) 4-3. CHASSIS (2) REF. NO. PART NO. DESCRIPTION REMARK X-2102-383-2 CABINET ASSY (15), FRONT X-2103-210-2 MULTI (15) ASSY, BUTTON SUBJECT : PART CHANGE EXPLODED VIEWS...
Page 73
SUBJECT : PART CHANGE (KLV-B20G10) (refer page 74) 4-3. CHASSIS (2) REF. NO. PART NO. DESCRIPTION REMARK X-2102-386-2 CABINET ASSY (20), FRONT X-2103-217-2 MULTI (20) ASSY, BUTTON Sony Corporation Sony EMCS (Malaysia) Sdn. Bhd. English 9-872-856-02 Visual Products 2005.12 – 94 –...
Page 75
All manuals and user guides at all-guides.com...
Page 76
All manuals and user guides at all-guides.com Table of Contents Safety Information ........4 Set Up menu..........24 Auto Start Up............24 Securing the TV .......... 8 Language ............24 Overview of the remote ....... 9 Auto Program ...........24 Overview of the TV buttons and Program Sorting ..........25 indicators..........
All manuals and user guides at all-guides.com Vehicle and ceiling Safety Information Do not install this LCD TV in a vehicle or hang it from the ceiling. Bumping of the vehicle may cause the LCD For Safety TV to fall down and cause injury.
Page 78
All manuals and user guides at all-guides.com Ventilation Power Sources Leave space around the LCD TV and the AC adaptor. Overloading Otherwise, adequate air-circulation may be blocked causing This LCD TV is designed to overheating and cause fire or damage the LCD TV. operate on a 110-240 V AC supply.
Page 79
All manuals and user guides at all-guides.com Additional Safety Information Damage requiring service Electric shock If the surface of the LCD TV cracks, do not touch it until you Do not touch the LCD TV with a wet hand. Doing so may unplug the AC power cord.
Page 80
If the AC power cord is damaged, stop using it and ask your • Do not install the display unit in a place exposed to direct dealer or Sony service center to exchange it. air conditioning. If the display unit is installed in such a...
All manuals and user guides at all-guides.com On cleaning the cabinet Securing the TV • Be sure to unplug the AC power cord connected to the LCD TV from the AC power outlet before cleaning. • Clean the cabinet with the cleaning cloth or a soft cloth lightly moistened with a mild detergent solution.
All manuals and user guides at all-guides.com Overview of the remote 1 TV "/1: TV standby Switches off the TV temporarily. The (standby/sleep timer) indicator on the front of the TV lights up. Press again to switch on the TV from standby mode. 2 %: Mute (page 16) Mutes the sound.
All manuals and user guides at all-guides.com Overview of the TV buttons and indicators 1 "/1: Power Switches the TV on or off. 2 PROG +/– In TV mode: Selects the next (+) or previous (–) channel. 3 2 +/– Increases (+) or decreases (–) the volume.
All manuals and user guides at all-guides.com Getting Started 1: Inserting batteries into the remote Notes • Observe the correct polarity when inserting batteries. • Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of the battery. Please consult your local authority.
All manuals and user guides at all-guides.com 2: Connecting an antenna/VCR To 8 VHF/UHF Rear of the TV (antenna) DC IN VHF/UHF 16.5V AC adaptor Antenna cable (not supplied) (supplied) AC power cord (supplied) Rear of the TV DC IN To 8 VHF/UHF VHF/UHF 16.5V...
All manuals and user guides at all-guides.com Connect your antenna with the antenna 3: Switching on the TV cable (not supplied). If connecting to an antenna only (A) Connect the male plug to the VHF/UHF (antenna) jack on the rear of the TV, then go to step 3.
All manuals and user guides at all-guides.com 4: Selecting the 5: Auto-programming language the TV When you switch on the TV for the first time, the After selecting the language, a message confirming Language menu appears on the screen. the TV start auto program appears on the screen. You must tune the TV to receive channels (TV broadcasts).
Page 88
All manuals and user guides at all-guides.com When a message appears for you to confirm the antenna connections No channels are found. Check all the antenna connections and press to start auto-program again. The Program Sorting menu appears on the screen.
All manuals and user guides at all-guides.com Watching TV Watching TV Press ?/1 on the TV (top side) to switch on the TV. When the TV is in standby mode (the 1/ (standby/sleep timer) indicator on the front of the TV is red), press TV "/1 on the remote to switch on the TV.
All manuals and user guides at all-guides.com To access Text Viewing pictures from Press /. Each time you press /, the display changes cyclically as follows: connected equipment Text t Text over the TV picture (mix mode) t No Text (exit the Text service) To select a page, press the number buttons or PROG +/–.
All manuals and user guides at all-guides.com Overview of the menus Using the Menu The following options are available in each menu. Navigating through Also, see page in parentheses for details of each menu. Picture menus Picture Mode Personal Picture Brightness Color Sharpness...
All manuals and user guides at all-guides.com Picture menu You can select the options listed below on the Picture Picture menu. To select options, see “Navigating through Picture Mode Personal menus” (page 18). Picture Brightness Color When you set the “Picture Mode” option to “Live” or “Movie”, you can adjust only “Picture”, “Reset”, “NR”...
All manuals and user guides at all-guides.com Color Temperature Press OK to select “Color Temperature”. Press M/m to select one of the following, then press OK. Cool: Gives the white colors a blue tint. Normal: Gives the white colors a neutral tint. Warm: Gives the white colors a red tint.
All manuals and user guides at all-guides.com Sound menu You can select the options listed below on the Sound Sound menu. To select options, see “Navigating through Sound Effect Natural menus” (page 18). Treble Bass Balance Reset Dual Sound Stereo Intelligent Volume Select: Enter:...
All manuals and user guides at all-guides.com Dual Sound Selects the sound of NICAM or A2 (German) stereo system. Press OK to select “Dual Sound”. Press M/m to select one of the following, then press OK. The selection varies, depending on the Broadcasting. Broadcasting Selection NICAM stereo...
All manuals and user guides at all-guides.com Features menu You can select the options listed below on the Features Features menu. To select options, see “Navigating through menus” (page 18). Power Saving TV Speakers Select: Enter: Back: End: MENU Power Saving Reduces the power consumption of the TV.
All manuals and user guides at all-guides.com Set Up menu You can select the options listed below on the Set Up Set Up menu. To select options, see “Navigating through Auto Start Up menus” (page 18). Language English Auto Program Program Sorting Program Label AV Preset...
All manuals and user guides at all-guides.com Program Sorting Changes the order in which the channels are stored on the TV. Press OK to select “Program Sorting”. Press M/m to select the channel you want to move to a new position, then press OK.
All manuals and user guides at all-guides.com Manual Program Before selecting “Program Label”/“Fine”/“Audio Filter”/“Skip”, press PROG +/- to select the program number with the channel. You cannot select a program number that is set to skip (page 27). Press OK to select “Manual Program”. Press M/m to select one of the following options, then press OK.
Page 100
All manuals and user guides at all-guides.com Option Description Fine Fine-tunes the selected program number manually if you feel that a slight tuning adjustment will improve the picture quality. (Normally, fine tuning is performed automatically.) Press M/m to adjust the fine tuning over a range of -15 to +15, then press OK.
All manuals and user guides at all-guides.com Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied. Connecting to the side of the TV (MONO) S VHS/Hi8/DVC camcorder Headphones Connecting to the rear of the TV...
Page 102
All manuals and user guides at all-guides.com To connect Do this S VHS/Hi8/DVC Connect to the S video jack camcorder A or the video jack 2 and the audio jacks 2. To avoid picture noise, do not connect to the video jack 2 and the S video jack 2 at the same time.
More than 500 mVrms (Fixed) only), NTSC 3.58 Headphones i Stereo minijack Antenna Sound Output 75 ohm external terminal KLV-B20G10: 3 W + 3 W KLV-B15G10: 2 W + 2 W Design and specifications are subject to change without notice.
Double images or ghosting • Check antenna/cable connections. • Check the antenna location and direction. Contact a Sony dealer for advice. • Broadcast signals are reflected by nearby mountains or building. Use the fine tuning (“Fine) function (page 27). Otherwise, use a highly direction antenna.
Page 105
• Keep the antenna cable away from other connecting cables. • Do not use a 300-ohm twin lead cable as interference may occur. • Adjust the antenna direction for the minimum interference. Contact a Sony dealer for advice. Picture noise when viewing a •...
Page 106
TV, VCR, and on the wall (page 12). distorted; • Adjust the antenna direction for the minimum interference. Contact a Sony The sound switches between dealer for advice. stereo and monaural frequently •...