Rds (Radio Data System) - Teac CR-L600 Owner's Manual

A
40

RDS (Radio Data System)

RDS is a broadcasting service which allows stations to
send additional information along with the regular radio
program signal. RDS can be received only in FM band.
Every time the RDS button is pressed, the mode is
A
changed as follows:
PS (Program Service Name)
When you select PS, "PS" is displayed, and in 4
seconds, the program service name will be displayed.
If there is no PS data in the station, the frequency will
be displayed.
CT (Clock Time)
When you select CT with the RDS MODE button, "CT"
will blink for about 4 seconds. After 4 seconds, the
clock time will be displayed.
If there is no CT data among received broadcastings,
"NO CT" will be displayed.
PTY (Program Type)
When you select PTY, the type of received PTY will be
displayed.
RT
When you select RT with the RDS mode button, "RT"
will blink for about 4 second.
After 4 seconds, the data of received RT will be
displayed.
If there is no RT data among received broadcasting,
RDS mode will be automatically switched to PS mode.
TA (Traffic Announcement )(TP Search)
When you select TA by use of the RDS button, "TA" will
blink for about 4 seconds. After 4 seconds, TP received
broadcasting will be searched with FM frequency
increasing in 50 kHz steps.
If TP received broadcasting is searched, the increase
in frequency will stop and it is asked whether TA will
be received or not.
If TP and TA turn off while you are receiving TA, the
tuner will search TA broadcasting again with FM
frequency increasing in 50 kHz steps.
ENGLISH