Solid State Drive; Removing The M.2 Solid State Drive-Ssd Module - Dell Precision 7740 Service Manual

2. Install the:
a. base cover
b. battery
c. battery cover
d. SD card
3. Follow the procedure in

Solid State Drive

Removing the M.2 Solid State Drive—SSD module
1. Follow the procedures in
2. Remove the:
a. SD card
b. battery cover
c. battery
d. base cover
NOTE: Removal of base cover is required only to access the M.2 SSD module in slot 3, 5 or 6.
3. To remove the M.2 SSD module (Slot 4):
a. Remove the single (M2.0x3.0) screw that secures the SSD assembly to the system [1].
b. Pull the release latch to unlock the SSD assembly [2].
c. Remove the SSD assembly from the system [3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 41