Documents; Acceptable Documents - Canon IMAGEFORMULA DR-X10C Reference Manual

2.

Documents

The DR-X10C scanner can scan documents ranging in size from business cards and checks to 11" × 17"/A3 size. The size and type
of paper that can be fed depends on the feeding method.

Acceptable Documents

The scanner can feed the following document sizes.
Size
Width: 2" to 12.01" (50.8 mm to 305 mm)
Length: 2.76" to 17.01" (70.0 mm to 432 mm) (without
using the Long Document Mode)
2.76" to 39.37" (70.0 mm to 1m) (using [ON1] in the
Long Document Mode)
2.76" to 118.11" (70.0 mm to 3m) (using [ON2] in the
Long Document Mode)
Hint
When the Long Document Mode is selected, Paper Size
Detection can be used for scanning documents up to 118.1".
(3 m) long. For details, refer to the User Manual.
Paper Thickness
Page Separation Feeding: 14 to 32 lb bond (52 g/m
2
128 g/m ) (0.06 mm to 0.15 mm)
Bypass Feeding: 11 lb to 64 lb bond (42 g/m
(0.05 mm to 0.30 mm)
Hint
• Continuous feeding feeds document pages one after another
by the feed and retard rollers after placing a batch of
documents in the Document Feed Tray.
• Manual feeding requires feeding one document at a time while
the [Bypass Mode] key on the control panel is lit and the
Document Feed Tray is raised.
IMPORTANT
A document must meet the following criteria to
be scannable:
• When scanning a multipage document, pages must be
grouped together so that they have the same size, thickness,
and weight. Scanning different types of paper at one time can
cause the scanner to jam.
• Always make sure that the ink on a document is dry before
scanning it. Scanning documents with the ink still wet may soil
2
to
the rollers or scanning glass, cause lines or smudges to
appear on images, or dirty other documents.
2 2
• Always clean the rollers or scanning glass after scanning a
to 255 g/m )
document written in pencil. Scanning documents with pencil
written on them may soil the rollers or scanning glass, cause
stripes to appear in images, or dirty other documents.
• When scanning a two-sided document that is printed on thin
paper, the image on the opposite side of each page may show
through. Adjust the background color and scanning brightness
from the application program before scanning.
• Note that scanning the following types of documents can
cause a paper jam or malfunction. To scan such a document,
make a photocopy of the document and then scan the
photocopy.
Bypass Mode Key
Wrinkled or creased
Carbon paper

documents

Curled documents Coated paper
2
15