Trip Meter 1 (Trip 1) - Ducati Diavel 1260 Owner's Manual

Trip meter 1 (TRIP 1)

The trip meter counts and displays the partial
distance covered by the motorcycle with the set unit
of measurement (km or mi) and is used as a basis to
calculate average fuel consumption, average speed
and trip time. The TRIP1 number (in km or miles) is
displayed with the message TRIP1 and the indication
of the unit of measurement.
When the reading exceeds the maximum value of
9999.9 km or 9999.9 mi, distance travelled is reset
and the meter automatically starts counting from 0
again.
While the trip meter is displayed, press button (1) for
2 seconds to reset TRIP 1. When TRIP1 is reset, the
average fuel consumption, average speed and trip
time data are reset as well.
Considering that the TRACK, FULL and CITY layouts
show the values for this function in a similar way to
the CORE layout, the example shown depicts the
function in CORE layout.
176
CORE
3 4 5
10
2
1
RPM
x1000
SPORT
2
299
TRIP Km
1
9999.9
TRIP Km TRIP
1 1
The TRIP1 counter is automatically reset in case the
system unit of measurement is changed manually or
after a Battery-OFF: the counter will then start back
from zero, considering the new units of
measurement.
1
6
7
8
9
10
Km/h
1
299
Km TRIP
1
0
Km
Fig 118