Scanning From The Feeder - Canon iR Series User Manual

Scanning from the Feeder

When using Network ScanGear to scan with the feeder, you can scan a number of originals
in succession.

Scanning from the Feeder

Follow the procedure below to scan from the feeder.
IMPORTANT
•
If you are using Network ScanGear for the first time after installing it, the network scanner to be
4
used must be selected with the ScanGear Tool. For details, see 'Selecting the Network Scanner to
be Used,' on p.3-8.
•
Before scanning, you must first switch the scanner online. For details, see 'Switching the Scanner
Online and Offline,' on p.3-2.
•
When scanning from the feeder, use only standard size originals. To scan originals that are not a
standard size, use the platen glass.
1
2
3
4-4 Scanning from the Feeder
Start Network ScanGear from the application.
For details, see the section, 'Starting Network ScanGear,' on p.3-10.
In the Main sheet, select the original sides to be scanned for Original
Placement.
For 1-sided originals, select Feeder (1-sided); for 2-sided originals, select Feeder (2-
sided).
In the Main sheet, click the Orientation button to display the
Orientation dialog box, and set the original feeding direction.
For 2-sided originals, specify the Book Opening direction (i.e. the relation between the front
and back sides).
For details of the setting, see 'Ensuring Scanned Originals are Correctly Oriented,' on p.4-
6.