Table of Contents
Advertisement
3. Camera setup
3.1 Wall mount
The Jabra PanaCast camera can be mounted to
the wall using the optional wall mount
accessory. A screwdriver and two 1/4 inch
screws are required (not supplied).
Optimally, the camera should be mounted at
eye-level of the participants.
Additionally, the camera should be wall
mounted 0.5m to 3.5m from participants (1.5ft
to 11.5ft). Any further and the camera may
pixelate the image of the participants. Any
closer and the image of the participants may
be negatively affected by the image stitching.
Do not mount the camera facing direct sunlight
as this may affect the preset white balance and
compromise the image.
8
Advertisement
Table of Contents
