Assembly - Husky HOTC6110BB1M Use And Care Manual

Assembly

1
Attaching the side handle
□ Attach the side handle (F) to the cabinet using four bolts
(BB).
□
Tighten all bolts with the 10 mm wrench (CC).
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
3
Installing the pegboard brackets
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the pegboard bracket (P) to the cabinet (B) and
pegboard (Q) using four bolts (BB) per bracket.
□ Tighten all bolts securely.
□
BB
F
CC
□
Q
P
BB
B
2
Installing the cord brackets
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the cord bracket (D) to the cabinet using two bolts
(AA) per bracket.
□ Tighten all bolts securely.
4
Installing the pegboard shelf brackets
: The holes in the cabinet are tapped and do not
NOTE
require nuts.
□
Attach the pegboard shelf bracket (S) to the pegboard (Q)
using two bolts (AA) per bracket.
□
Tighten all bolts securely.
□
Place the shelf (R) on the bracket safety.
AA
S
6 6
□
D
□
R
Q
AA