Monitor Output And Digital Input Functions; Connector Pin Assignment - Canon GC-201 User Manual

Monitor Output and Digital Input Functions

5.
The controller has an analog monitor output connector for monitoring the operation status and a digital
I/O connector for external signal input.

5.1. Connector Pin Assignment

The controller is equipped with the following:
Analog monitor output connector ×1
Digital I/O connector ×1
Analog monitor output
connector
In order to evaluate this galvano scanner, the above output connectors are connected, and a monitor
board for evaluation that can confirm analog output signals and the I/O of a digital signal is prepared
as an optional product. Please contact the Sales Department for details.
Monitor Board for
The signal name is displayed on the evaluation monitor board. Please check the signal after referring
to the table of the following pin arrangement.
CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
evaluation
Digital I/O
connector
62