Table of Contents
Advertisement
_________________________________________________________________________________________________________
6
OPERATION
6.1
Description
After the radio and antenna system has been installed and the radio properly configured, the
radio can be placed into operation.
6.2
Base Station Operation
The basic functionality of the base station can be determined from the LCD screen. If a remote
station is connected to the base station, a series of LCD screens will be cycled in succession as
shown in Figure 6-1.
Figure 6-1 Base Station LCD Screen – Remote Station Connection
6.2.1 Base Station CLI
The base station CLI includes many features for manipulating key configuration parameters,
however, it is recommended that it be used primarily for obtaining measurement and status
information as described in the following sections.
COM-00-21-05
Version No.: A
SECTION 6
OPERATION
6-1
OPERATION
OCTOBER 2021
Advertisement
Table of Contents
