Table of Contents
Advertisement
50" Cone Assembly
Note: Fan must be installed in the wall before proceeding with Discharge Cone installation.
Remove packaging from cone and guard sections.
Find Hardware Package #10-0068 consisting of the following parts:
99-0009 - - - 5/16 SS Fender Washer - - - 38pcs.
D03-0159 - - - 5/16-18 Flanged Whiz Nut - - - 19 pcs.
S-7447 - - - 5/16-18 x 1" SS Whiz Bolt - - - 12pcs.
S-8168 - - - 5/16-18 x 1 1/2" SS Whiz Bolt - - - 7pcs.
Assemble the cone on the ground with the 1" bolts, fender washers and whiz nuts, leaving bolts
loose. Leave the 1 1/2" bolts out completely until you mount the cone on the fan outlet. Use the pilot
hole to help align disharge cone.
28
Advertisement
Table of Contents
