Table of Contents
Advertisement
APPB-50C KNOCKDOWN INSTRUCTIONS
1. Remove housing from packing crate. Locate hardware package
from crate. Locate box found in the front of the crate
box
labelled 11-0208, 11-0209, and 16-0034.
2. Remove one bearing plate 11-0208, one motor mount leg
11-0209, and one spring tensioner plate 16-0034. Remove
the following hardware from the box: four 3/8" x 1-1/2" bolts
part # S-8140, four 3/8"-16 hex nuts part # S-7519, four 3/8"
washers part # S-7021, one 1/4"-20 eyebolt, two 1/4" washers
part # S-6673, and one 1/4"-20 nylock nut part # S-7307.
13
Advertisement
Table of Contents
