Braun TexStyle 7 Pro Manual page 12

English
Before use
Please read instructions carefully and
completely before using the appliance.
Caution: Due to the high power of this
steam iron please make sure that your
mains supply is sufficient. Please contact
your local electric power company to
make sure that the so called mains
impedance is not higher than 0.350 Ohm.
Description
1 Water Tank Filling
2 Steam Regulator
3 Temperature Selector (SI 71xx only)
4 Temperature Control LED
5 Power Cord
6 Steam Shot Trigger
7 Turbo Steam Button
8 Spray Button
9 Spray Function
10 Iron Rest Position
Intended Use
The appliance must be used only for ironing
garments which are suitable for ironing according
to the care label. Never iron or dampen garments
while wearing them.
(A) Start Ironing
For details refer to fi g.A.
Before starting to iron, follow the garment care label
instructions carefully. Fabrics with this symbol
not ironable.
Note: If you have extremely hard water, we
recommend that you use 50 % tap water and 50 %
distilled water. Never use distilled water exclusively.
Do not use condensation water from a tumble dryer.
(B) Steam Options
Continuous steam (normal)
It is suggested for garments like wool, polyester
and cotton/linen.
Continuous steam (turbo)
It is suggested for garments that need more
powerful steam, like thick cotton/linen and jeans.
Note: While ironing, do not turn the steam regulator
beyond setting «6».
Steam shot
Prior to use, press the steam shot trigger 3 to 4 times
to activate it. For a powerful boost of steam, press
the steam shot trigger at intervals of a few seconds.
12
Temperature (SI 71xx only)
level 1 (•)
level 2 (••)
level 3 (•••)
(C) Auto Off
For safety reasons and reduction of power
consumption, the auto-off function is automatically
activated. For details refer to fi g. C.
(D) After Ironing
Let the iron cool down before storing. For details
refer to fi g. D.
(E) Descaling
Do not use commercial decalcifi ers, they may
damage the iron.
Frequency of descaling depends on the hardness
of the water, quantity of steam used and frequency
and duration of ironing sessions. It is a good
practice to run the descaling procedure at least
once per month.
For SI 92xx only
The steps described under „Preparation" and „Self
clean" need to be repeated twice.
For details refer to fi g. E.
Note: The iron must never be used without steam
regulator.
(F) Care and Cleaning
are
Before cleaning, always make sure that the iron has
cooled down completely. For details refer to fi g. F.
Warranty and Service
For detailed information see separate warranty and
service leafl et or visit www.braunhousehold.com.
Synthetics
Wool, silk, polyester
Cotton, linen