Grizzly T10256-58 Instructions

Introduction
The wood hand plane is a simple tool that is
designed to shape wood or clean up edges for
joinery.
Your hand plane features a hardwood body,
a steel blade (also called an iron) and a wood
wedge for locking the blade in place. To achieve
the best results when using your specific type of
hand plane, we recommend reading books and
magazines, and researching the internet.
Inventory
A. Plane .......................................................... 1
B. Blade .......................................................... 1
C. Wedge ........................................................ 1
Setting the Blade
1. orient the blade bevel for the type of plan-
ing you intend, then insert the blade into the
plane.
2.
set the blade bevel slighly below the sole for
the initial cut, as shown in figure 1.
figure 1. Example of blade secured with
WARNINg: NO PORTION Of THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE
OR fORM WITHOUT THE WRITTEN APPROvAL Of gRIzzLy INDUSTRIAL, INC.
wedge.
CoPYrighT © oCToBEr, 2010 BY grizzlY indusTrial, inC.
#Bl13386 PrinTEd in China
MODEL T10256-58,
T10265-67, T10269-71
HAND PLANES
INSTRUCTIONS
3. slide the wedge over the blade and into the
throat (figure 1) until the wedge is snug and
prevents the blade from moving forward.
4.
Verify that the blade is parallel with the sole—
so an even amount of the blade protrudes
from one side to the other. adjust the blade
as needed so it will cut evenly. one side will
cut more than the other if the blade is not
parallel to the sole.
5.
lightly tap the wedge with a mallet to set the
blade depth.
To reduce the risk of injury when using this
tool:
• Use care when handling the plane blade.
It is sharp and can cause lacerations.
• Protect your eyes from flying chips by
wearing safety glasses.
• Make sure the workpiece is properly
secured.
• Use both hands to guide the plane over
the workpiece.
• Keep the plane away from children.