Heating And Cooling - Roadtrek E-trek 2016 Owner's Manual

Heating and Cooling

Heating and Cooling
Heating
Your Roadtrek has a single unit that provides both cabin heat
and hot water. The controls are located behind the TV. To access
the Webasto hot water and cabin heating controls, swivel the
television out of the way.
The controller has two dials; the left selects the mode and the
right sets the heating level.
For the left dial, starting at the Lock position and going
clockwise:
• Drain - the unit will lock out for 90 minutes and drain the
system. This is done as a part of winterizing; see HOWTO:
Water System Winterizing
• • Off - unit is off and consumes no electricity
• • Summer mode - first two positions are for Summer use - i.e.,
hot water but no cabin heat.
• • Selects 40 deg. C water temperature
• • Selects 70 deg. C water temperature
• • Winter mode - these two positions are for Winter use - i.e.,
cabin heat with or without hot water. The right knob selects the level of cabin heat.
• • The first position selects cabin heat only and no hot water
• • Second position selects cabin heat and hot water production
• • Frost protection - the last setting on the right is frost protection. In this mode the heater will operate to keep the water in
the boiler above freezing.
This does not provide any protection for the pipes and faucets in the rest of the E-Trek. To protect these, perform the
winterization procedure.
Heating controls
© 2016 by Erwin Hymer Group North America, Inc.
48