Installing/Mounting; Permitted Mounting Positions - Siemens SIMATIC HMI IPC577C Operating Instructions Manual

Operating Instructions (compact)

1.7 Installing/Mounting

1.7 Installing/Mounting
1.7.1

Permitted mounting positions

Mounting positions
Only vertical installation with two mounting directions of up to +45° and -45° is permitted for
the device.
With installed Compact Flash card
Rear
0° - 50°C
0° to 45°C
= Installation according to RAL (Restricted Access Location)
1
(installation of device in operating facilities with restricted access, for example, a locked
control cabinet)
Mechanical environmental conditions
● Vibration
10
Temperature at the device
Front
Max. 40°C
1)
0° to 45°C
– Operation, tested in accordance with DIN IEC 60068-2-6
10 to 58 Hz: 0.075 mm 58 to 200 Hz: 0.5 m/s²
– Storage/transport, tested according to IEC 60068-2-27, IEC 60068-2-29
50 m/s2, 30 ms,
250 m/s2, 6 ms,
Angle A
+45°
+45°
Operating Instructions (Compact), 05/2009, A5E02368077-01
Angle B
-45°
-45°
SIMATIC HMI IPC577C