Table of Contents
Advertisement
ADJUSTMENT [LCD] USA
(8) Number of times of TV ON/OFF.
(9) Temperature display of thermo-Sensor. (DMD) : LCD Model not used.
(10) Temperature display of thermo-Sensor. (LAMP) : LCD Model not used.
(11) DMD Engine System status
(12) TV-MICRO System status
(13) IIC-BUS status
Bus line normal is "None" displayed.
When it is abnormal, the block name is displayed as follows.
"SCL-GND" (Red indication) : SCL-GND short circuit
"SDA-GND" (Red indication) : SDA-GND short circuit
"SCL-SDA" (Red indication) : SCL-SDA short circuit
"NG : MTS"
"NG : APRO"
"NG : AVSW"
LED Indication
The yellow, blue and red/green LED lights on the TV (at the bottom center of the TV)
indicate the TV's status, as described below:
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is
unplugged), when power is restored, the yellow LED will blink while the TV is booting until
the remote control is usable. This is normal and is not a sign of malfunction.
LED Indication
1 Green and Yellow are off. Power supply OFF. (AC)
2 Green and Yellow are off. Power supply OFF. (Stand by)
3 Green is on (solid).
4 Yellow is on (solid).
file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17_sm\32LV17-...
: LCD Model not used.
: LCD Model not used.
: Not used
Condition
The TV is operating properly.
A disk is in the disk slot.
Стр. 7 из 8
30.04.2015
Advertisement
Table of Contents
