Table of Contents
Advertisement
CSRA-SVX02A-EN
Installation
Figure 13 — Incorrect Horizontal/Vertical Installation
Incorrect horizontal/vertical installation shows an incorrect horizontal/vertical
hose installation. In this configuration, a number of improper installation
techniques can be noted:
• elbows are not installed
• the hose is completely supported by the couplings
• the vertical run of hose is greater than 7 feet
• the hose is not adequately supported by the ground
Figure 14 — Correct Unsupported Horizontal Installation
Correct unsupported horizontal installation illustrates a correct horizontal
hose installation where there is a section of unsupported hose. The length of
unsupported hose should be less than 7 feet. Also, the hose must be
adequately supported by having more than half its total length on the ground.
31
Advertisement
Table of Contents
