Specifications - Toro 58603 Operator's Manual

•
Drive: Only the wheels are engaged with the
engine; the tines are disengaged. Use this mode
for powered transportation when driving up steep
inclines and moving the machine to and from your
garden.
Figure 16
•
Counter-rotating tines (CRT): The wheels and
tines are both engaged with the engine; the tines
spin in the opposite direction of the wheels. Use
this mode when breaking new ground or tilling in
compacted soil conditions.
Figure 17
•
Neutral: The wheels and tines are both
disengaged from the engine. Use this mode for
storage and non-powered transportation.
Figure 18
Drive-Control Levers
Pull down the forward lever to engage the transmission
in the forward direction; pull up on the reverse lever to
engage the transmission in the reverse direction.
Release the levers to disengage the transmission.
Important:
Do not attempt to engage the forward
and reverse levers at the same time.
WARNING
Contact with moving tines can result in
personal injury.
When moving the machine in reverse, watch
g356988
for obstacles behind you and keep your feet
away from the tines.
1. Forward lever
g356987

Specifications

Specifications and design are subject to change
without notice.
Height
Length
Width
Weight
Tilling width
Tilling depth
g356989
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
11
Figure 19
2. Reverse lever
103.1 cm (40.6 inches)
158.8 cm (62.5 inches)
50.8 cm (20.0 inches)
72.6 kg (160 lb)
43.2 cm (17 inches)
28 cm (11 inches)
g357052