Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Changing System IDs
This command is used to change the system ID. In the SuperStream address space, a stream
has multiple systems. In order to uniquely identify the destination for all data coming from a
single paging terminal output encoder, the system ID must be unique. System IDs must be the
same for an entire simulcast system.
1.
From the SuperStream menu, use the
Change System ID
Figure 4-8: SuperStream Menu—Change System ID
The Select Systems Options screen appears with three options (see Figure 4-9):
– Change primary system ID
– Add alternate system ID
– Delete alternate system ID
May 1998
<tab>
and press:
(see Figure 4-8).
<Return>
6880494G55-O
to position the cursor to the left of the listing
SuperStream Commands
4-9
Advertisement
Table of Contents
