RF-Conductor! Controller NIU Remote Configuration
2.
Position the cursor next to the release to be deleted and press:
controller is identified by the prefix:
•
HNU is for internal NIU
•
HEX is for external NIU
•
SC is for Nucleus SCM
If the delete command is successful the system displays:
Install NIU/SCM Software Version request accepted
3.
To return to a previous menu or screen, press:
Figure 6-4: Delete an Installed NIU/SCM Release Screen
May 1998
<Ctrl + p>.
6880494G55-O
Software Linkload Commands
. The type of site
<Return>
6-5