Operation - Prem-I-Air EH0516 Manual

•
Plug the mains lead into a 13 Amp mains socket.
•
If connecting via an extension lead, make sure that the lead
is rated at 3 Amps or more, and that it is fully unwound.
•
Switch the appliance on at the mains socket.
•
Turn the rotary switch to the speed required:
Low Speed = 840 m
Medium Speed = 900 m
High Speed = 960 m
•
Oscillation is selected by pressing the oscillation knob
downwards (see diagram on page 2), and switched off by
pulling it upwards
•
It is normal for the motor to become warm in normal use.
•
Unplug the appliance from the mains when not in use.
At time of going to press, the average cost of electricity is
£0.11 per unit (kilowatt-hour). The amount you are being
charged will be shown on your electricity bill. At this cost, the
EH0516 will cost 8p per day to run on the "low speed"
setting, 10p per day on the "medium speed" setting or 12p
per day to run on the "high speed" setting.

OPERATION

3
/h airflow
3
/h airflow
OPERATING COSTS
Page 3
3
/h airflow