Connecting To Video Equipment - Canon LV-S4 Owner's Manual

Installation

Connecting to Video Equipment

Cables used for connection
• Scart-VGA Cable (Separately supplied as LV-CA31) ✽
• S-VIDEO-VGA Cable (Separately supplied as LV-CA33) ✽
• S-VIDEO Cable ✽
• Component-VGA Cable
• Component Cable ✽
• Video Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
RGB Scart S-Video
21-pin Output
Output
S-Video
cable✽
Scart-VGA
cable ✽
S-Video-
VGA cable✽
✔
Note:
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
• Audio out and Monitor out terminal works only when the projector is under
operation and do not work when the projector is in the stand-by state or the Power
management mode (p41).
• See p57 for ordering optional parts.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
16
(Separately supplied as LV-CA32)
Component
Video Output
(Y, Pb/Cb, Pr/Cr)
Component
cable✽
cable ✽
Component-
VGA cable ✽
COMPUTER /
S-VIDEO /
COMPONENT IN
✽
Video Audio
Output
Output (Stereo)
Audio
Video
cable ✽
(stereo)
VIDEO AUDIO IN
AUDIO OUT
SERVICE PORT
VIDEO AUDIO IN
(VARIABLE)
COMPUTER/ S-VIDEO/ COMPUTER/ S-VIDEO/
MONITOR OUT MONITOR OUT
COMPONENT IN
RESET
External Audio Equipment
Audio Input
Audio cable ✽
(stereo)
AUDIO OUT
(VARIABLE)