Top Control - Canon LV-S4 Owner's Manual

Part Names and Functions

Top Control

q POWER button
Turn the projector on or off. (p17, 18)
POWER indicator
Flash red until the projector gets ready to be turned
on. It turns red when the projector is in the stand-by
mode. It remains green while the projector is under
operation. (p17, 18, 54)
w LAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws
to an end. (p48, 54)
e WARNING indicator
Emit red light when the projector is in the abnormal
condition. This indicator also flashes red when the
internal projector temperature goes up over the
operating range. (p45, 54)
10
POWER
VOL
-
WARNING
LAMP REPLACE
w e
q r
VOL
MENU INPUT
+
t y
r OK button
Execute the item selected. It is also used to expand/
compress the image in Digital zoom +/– mode. (p31)
Point e e d d 7 8 ( VOL + / – ) button
Select an item or adjust the value in the On-Screen
Menu. These are also used to pan the image in the
Digital zoom + mode. (p31)
Point 7 8 button are also used as VOL +/– button. (p23)
t MENU button
Open or close the On-Screen Menu. (p20)
y INPUT button
Select the input source. (p24, 32)