Sony BPU4500A Operation Manual page 24

Operation Frame rate
mode
HD CUTOUT 59.94
50
1) When the division method is 2SI, the output is P (progressive). When the division method is SQD, the output is PsF.
2) 720P format is output only when the format of the connected CCU is 720P.
3) A Slot1/Slot2 output format of "4K" refers to 4096×2160 or 3840×2160.
Notes
• For 4K, the following IP output formats are supported (when SKC-IP45AF is installed).
– SLOT1, SLOT2: 3840×2160 59.94P, 3840×2160 50P, 3840×2160 119.88P, 3840×2160 100P
– SLOT3, SLOT4: 1920×1080 59.94i, 1920×1080 50i
• The HD HFR signal and HD CUTOUT signal are output as SDI signals only. IP is not output.
Figure 1: Slot numbers and BNC connectors/NMI-LAN connectors
1) Requires the SKC-IP45AF Networked Media Interface Kit to use the NMI-LAN connectors.
SLOT3 (3G/HD output)
SLOT4 (HD output)
Slot1/Slot2
Output format Output format
1080/59.94P Perspective
1080/59.94i,
2)
720/59.94P
1080/59.94P Simple HD
1080/59.94i,
2)
720/59.94P
3)
4K/59.94P 4K (Quad-
Link-1)
3)
4K/59.94P 4K (Single-
Link)
1080/50P Perspective
1080/50i,
2)
720/50P
1080/50P Simple HD
1080/50i,
2)
720/50P
3)
4K/50P 4K (Quad-
Link-1)
3)
4K/50P 4K (Single-
Link)
SLOT3/4
SLOT4 HD SDI OUT
SLOT2 SDI OUT 1
SLOT2
Slot3
Output format
3G 1080/59.94P (3G), 1080/59.94i (1.5G),
720/59.94P (1.5G)
1.5G
3G
1.5G
3G
12G
3G 1080/50P (3G), 1080/50i (1.5G),
720/50P (1.5G)
1.5G
3G
1.5G
3G
12G
SLOT2 SLOT1
REFERENCE
SDI1 SDI2
REMOTE
IN
SLOT3 3G/HD SDI OUT SLOT1 SDI OUT 1 SDI OUT 2 SDI OUT 3 SDI OUT 4
SDI OUT 2 SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8
SLOT1
24
Slot4
1080/59.94i (1.5G),
2)
720/59.94P (1.5G)
1080/50i (1.5G),
2)
720/50P (1.5G)
1)
2)
2)