Sony MZ-N707 Operating Instructions Manual page 67

Symptom
Volume cannot be
turned up.
An MD is not played
normally.
An MD is not played
from the first track.
Playback sound
skips.
Sound has a lot of
static.
Cannot find the track
marks.
The rechargeable
battery does not start
charging. The
rechargeable battery
cannot be fully
charged.
The disc cannot edit
on other component.
Momentary noise is
heard.
The group function
(group mode/group
skip mode) does not
operate.
The display window
is not normal.
Cause/Solution
• AVLS is on.
, Set AVLS to "AVLS OFF" (page 56).
• Play mode is changed.
, Change to the normal play.
• Disc playing stopped before it came to the last track.
, Press N for 2 seconds or more to start playing, or press the
control towards . repeatedly on the remote control.
• Group mode is turned on.
, Turn group mode off and play from the first track (press N
for 2 seconds or more to start playing, or press the control
towards . repeatedly on the remote control).
• The recorder is placed where it receives continuous vibration.
, Put the recorder on a stable place.
• A very short track may cause sound to skip.
, Try not to create a track under one second long.
• Strong magnetism from a television or such device is interfering
with operation.
, Move the recorder away from the source of strong
magnetism.
• You pressed X after pressing . or >.
, Press X before pressing . or >.
• The rechargeable battery has been inserted incorrectly or the AC
power adaptor has been connected incorrectly.
, Insert the battery correctly or connect the AC power adaptor
correctly.
• The terminals of the battery charging stand is dirty.
, Clean the terminals with a dry cloth (page 60).
• The component does not support LP2 stereo or LP4 stereo.
, Edit on other component that support LP2 stereo or LP4
stereo.
• Due to the special digital audio compression technology used in
LP4 stereo mode, momentary noise may occur on very rare
occasions with certain sound sources.
, Record in normal stereo or LP2 stereo mode.
• When selecting program play, an attempt was made to turn
group mode on.
, Turn group mode on, before selecting program play.
• The recorder was disconnected from the power source.
, Let the recorder sit for a while, or disconnect the power
source, reconnect it, and then press any of the operation
buttons.
67
-GB