Table of Contents
Advertisement
different from the original one.
• This product is compatible with original
PegPerego products.
• For information on the product's
compatibility with PegPerego
accessories/frames, visit:
www.pegperego.com
COMBINED WITH CHASSIS:
• WARNING: make sure that all the
attachment devices of the Culla Elite
are correctly fixed before using.
• WARNING: never leave the child
unattended.
COMBINED WITH STAND:
• WARNING: This product is compatible
with the following original PegPerego
products: Bassinet Stand.
• WARNING: Do not use if any part
of the stand is broken, torn or
missing.
• WARNING: only use on a firm,
horizontal level and dry surface.
• WARNING: Do not let other children
play unattended near the carry cot
and stand.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com.
Instructions for use
Using the Culla Elite
1 HOOD: to lift the hood completely, pull it until it clicks.
2 To lower the hood, press down on the upper part of same
and, at the same time, lower it.
3 The hood comes with a mesh insert so that the baby can
be seen from any position. Pull the zippers as shown in the
picture and pull the hood further, to reveal the mesh insert.
4 FOOT MUFF: to secure it correctly:
Unfasten the hood button.
Position the foot muff in the bassinet.
5 Button the foot muff following the sequence as illustrated.
The foot muff in the figure is properly attached.
6 Fasten the velcro straps as illustrated.
7 The velcro straps can be used to fasten the foot muff to
the hood, so as to protect the child even more against the
elements. Unfasten the sides of the foot muff (arrow_a),
unfold it upwards (arrow_b) and fasten it to the hood with
the velcro straps (arrow_c);
8 CARRY HANDLE: this is built into the hood. To carry the
bassinet, lift the hood (if lowered) until it clicks and hold
the handle placed above it.
• Before lifting the bassinet, ensure the built-in hood is
correctly fastened.
• Before lifting the bassinet, make sure the hood is in the
correct position for transport.
• Before unfastening and lifting the bassinet from the frame,
adjust the backrest to its lowest position (figure 11).
9 ROCKING POSITION: The base of the Culla Elite has a special
shape which allows you to rock the child when it is placed
on a flat surface.
10 COT POSITION: It is possible to make the Culla Elite into a non-
rocking cot by opening out the two legs under the base.
11 ADJUSTING THE BACKREST and THE FOOTREST: with the
COMFORT SYSTEM, backrest and footrest can be adjusted
simultaneously. Pull the knob outwards (fig_a) while turning
it (fig_b) to raise or lower the backrest and the footrest.
12 FOUR SEASONS SYSTEM: as shown in the figure, it is
possible to adjust the product's air circulation from the
base in order to prevent condensation.
To create a cool, well ventilated environment (in summer),
13
Advertisement
Table of Contents
