ABB SACE Emax 2 Installation, Operation And Maintenance Instructions page 25

23 | © 2021 ABB | 1SDH002083A1002 - ECN000119014 - Rev. A
Continued from the previous page
12. Extract the crank. See Figure 47.
13. Replace the crank in its housing See Figure 48.
Figure 47
WARNING! The disconnector connected must be open in order to reach the test
position. The fail-safe in the UL version prevents the disconnector from being removed
from the fixed part when the springs are loaded. Release spring tension before
removing disconnector from fixed part. For further details, consult the Mechanical
Safety Accessories chapter in document 1SDH001330R1002.
To extract the moving part from the fixed part, perform the same steps indicated for insertion in reverse order.
Figure 49
Figure 48
Continued on the next page
Management operations | 3 - Description
ABB | SACE Emax 2