Unpacking And Handling; Opening The Packaging - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions
Hide thumbs
Also See for SACE Emax 2:
Table of Contents
Advertisement
2 - Unpacking and handling
Opening the packaging
11 | © 2021 ABB | 1SDH002083A1002 - ECN000119014 - Rev. A
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped packaging
pouch.
The following is the procedure for opening the packaging:
1.
Cut the bands that wrap the packing box. See Figure 7 and Figure 8.
Figure 7
2.
Open the upper part of the packing box. See Figure 9.
3.
Remove the packing box by lifting it upwards. See Figure 10.
Figure 9
Figure 8
Figure 10
Continued on the next page
Management operations | 2 - Unpacking and handling
ABB | SACE Emax 2
Advertisement
Table of Contents
