Recording Across Memory Media - Cross-Memory Recording - Sony ICD-SX712 Operating Instructions Manual

2
Press or
v V
select "Memory Card," and then press
/ENT.
N
"Select Memory" is set to "Built-In
Memory" when you purchase the IC
recorder.
If the memory card has already been
formatted, proceed to step 5.
3
When the memory card is not formatted,
select the
t "Format" in the menu, and then press
/ENT.
N
"Erase All Data?" will be displayed.
4
Press or
v V
select "Execute," and then press
ENT.
5
Press STOP to exit the menu mode.
x
To use the built-in memory
Select "Built-In Memory" in step 2.
52
GB
on the control button to
(IC recorder setting) tab
on the control button to
N
To start recording
Select the folder and then press
PAUSE.
For auto (AGC) recording, see page 24. For
manual recording, see page 41.
Recording across memory
media – cross-memory
recording
When the memory media currently being
used becomes full during recording, the IC
recorder automatically switches its
destination to the other memory media and
/
continues recording (Cross-memory
recording).
REC/
z
x STOP
N /ENT
v , V