Step 2: Recharging The Batteries; Recharging The Batteries Using A Computer - Sony ICD-SX712 Operating Instructions Manual

Step 2: Recharging the Batteries

Recharging the batteries
using a computer
Remove the film on the display window
before you use the IC recorder.
Connect the IC recorder to a running
computer, and charge the batteries until the
battery indicator indicates "
It takes about 4 hours to fully charge
exhausted batteries.*
1
Insert rechargeable batteries.
Slide and lift the battery compartment
lid, insert two NH-AAA rechargeable
batteries with correct polarity, and close
the lid.
2
Connect the IC recorder to your
computer.
Use the USB connecting cable supplied
with the IC recorder to connect the
14 GB
and the USB port of your computer.
."
While the batteries are charging,
"Connecting" and the battery indicator
are displayed in an animation.
(USB) connector of the IC recorder
Computer
To USB port of
your computer
To
connector
USB connecting cable
Battery indicator
IC recorder
(USB)