Controlling The Multiple Monitors (Rs-232C Protocol) - LG L3200TF User Manual

Controlling the Multiple Monitors
Use this method to connect several monitors to a single PC.
You can control several monitors at a time by connecting them to a single PC.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
* The RS-232C protocol is used for communication between the PC and monitor. You can
turn the monitor on/off, select an input source or adjust the OSD menu from your PC.
PC
Monitor
Communication Parameter
G Baud Rate : 9600bps (UART)
G Data Length : 8bits
G Parity Bit : None
G Stop Bit : 1bit
G Flow Control : None
G Communication Code : ASCII code
RS-232C Cable
(not included)
A38
(RS-232C protocol)