Engine - Install
DANGER
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply will result in death or serious injury.
WARNING
Maintenance hazard!
Before performing any maintenance or inspection:
-position machine on a firm, level surface
-turn off the engine
-remove the ignition key
-secure the machine (wheels chocked)
-disconnect the wiring
(unless instructed otherwise)
Failure to comply could result in death or serious injury.
1. Align the front support with the engine.
2. Install the bolts (2) for securing the support to the en-
gine. Tighten to a torque of 380 - 420 N·m (280 - 310 lb
ft).
3. Install the clutch assembly. Consult the procedures in
Clutch - Install (18.110).
4. Bring the front axle support assembly and transmission
engine together.
5. Install the bolts (1) for securing the engine to the trans-
mission. Tighten to a torque of 265 - 319 N·m (195 -
235 lb ft).
Engine - Engine and crankcase
47705279 11/09/2014
10.1 [10.001] / 11
D0076A
W1071A
1
LAIL11TL1148A0A
2
CUIL14TR00803AA